Model 4600

The rooflight model 4600 provides fresh air in the camper and thanks to its transpartent polypropylene also allows a lot of daylight into the interior. On the outside, a large overhang and snow and splash guard edge protect against water penetration, while on a inside, a fold-down mesh frame and an optional blackout blind provide protection from insects and sunlight.

Characteristics

• Outer dome made of transparent polypropylene with a large overhang
• with snow and splash guard edge
• Telescopic display unit, tiltable on all four sides, with locking mechanism
• optionally with double roller blind combination frame (470 x 470 x 14 mm), foldable mesh frame with or without blackout roller blind or pleated frame

Approval: ECE R43-019649

Please note: To help us conserve resources, we supply our rooflights without screws – the correct length depends on your roof thickness. This way, we avoid waste and you can choose the right screws. You'll find helpful tips in our installation instructions.

Technical data

Cutout dimensions	400 x 400 mm
Roof thicknesses from – to	24-56 mm and 42-70 mm
Corner radius	28 mm
Dome size	560 x 560 mm
Continuous ventilation	150 cm²
Height above roof	92 mm
Frame dimensions	470 x 470 x 14 mm
Recommended maximum speed	130 km/h

 

Scope of delivery:

Rooflight with top frame and inner frame of your choice

For assembly you will also need (not included):

• Elastic sealant adhesive, e.g. Dekalin Dekaseal 8936
• 8 x 3.5 mm pan head sheet metal screws (DIN ISO 7049). The screw length depends on the roof thickness.

Roof thickness (mm)	Screw length (mm)
24–34	25
31–41	32
37–47	38
44-54	45
51-56	50

Installation and operating instructions (PDF):

Model 46 with foldable net frame

Model 46 with double roller blind combination frame

Model 46 with pleated frame